ASSIGN Novell DOS 7, 0 success / help
Caldera OpenDOS 7.01 3 aborted by user (e.g. Ctrl-C)
4 syntax error
|
ATTRIB MS-DOS 5.0+, 0 success (DR DOS 6.0, too?) for
Novell DOS 7, Novell DOS 7 also "file not found"
Caldera OpenDOS 7.01 1 MS-DOS: file not found / syntax error
3 MS-DOS: aborted (DR DOS 6.0, too?)
31 Novell DOS 7+: invalid option or
aborted by user
|
APPEND Novell DOS 7, 0 success
Caldera OpenDOS 7.01 3 aborted by user
|
BACKUP MS-DOS 2.1+, 0 success
DR DOS 6.0, 1 no files to backup
CCI Multiuser DOS 7.x 2 some files not backed up, access
Novell DOS 7, denied or sharing violation
Caldera OpenDOS 7.01, 3 aborted by user
PC-DOS 7, 4 aborted because of error
OS/2 2.0+ 5 OS/2 2.0+: reserviert
6 OS/2 2.0+: could not FORMAT disk
|
COMP Novell DOS 7, 0 success (even if no target file
Caldera OpenDOS 7.01 found or file sizes differ!)
3 aborted by user
4 no files or source file not found
or syntax error
OS/2 2.0+ 0 success
1 no files found for comparison
2 some files or directories
could not be processed, file error
3 aborted by user
4 aborted because of error
5 files were different
|
CHOICE MS-DOS 6.?+, x depends on user keypress
PC-DOS 7,
Novell DOS 7,
Caldera OpenDOS 7.01
|
CHKDSK MS-DOS 6.2+, 0 drive found to be okay
CCI Multiuser DOS 7, 1 only MS DOS: could not check disk
OS/2 2.0+ because files are open. OS/2:
reserved
255 MS DOS / CCI: error found on drive
1 OS/2: reserved
2 OS/2: reserved
3 OS/2: aborted by user
4 OS/2: aborted because of error
5 OS/2: reserved
6 OS/2: CHKDSK could not load module
for this filesystem type
|
DEFRAG MS-DOS 6.2+, 0 defragmentation successful
PC-DOS 7 1 internal error
2 no clusters free (need at least 1)
3 aborted by user
4 general error
5 error when reading a cluster
6 error when writing a cluster
7 FAT error, use scandisk to correct
8 memory error
9 out of memory
|
DELTREE MS-DOS 6.2+ 0 success
? no success
|
DELWATCH Novell DOS 7, 0 success
Caldera OpenDOS 7.01 >27 in combination with /MBL: value
(DELWATCH 2.1) is n+27 for /F:n option, default
20+27 for floppy or 200+27 for
harddisk (maximum number of files
in delete-tracking queue).
|
DISKCOMP MS-DOS 4.0+, 0 disks are identical
DR DOS 6.0, 1 disks differ, or for all except
Novell DOS 7, OS/2 and MS DOS 4.x also: did not
Caldera OpenDOS 7.01, compare (syntax error or invalid
PC-DOS 7, OS/2 Warp 3 drive specified)
2 aborted by user
3 hardware error, did not compare
4 initialization error, out of
memory, invalid drive or syntax.
|
DISKCOPY MS-DOS 4.0+, 0 success (copy done)
Novell DOS 7, 1 corrected read/write error, for
Caldera OpenDOS 7.01, MS-DOS 5.0 also: invalid drive or
PC-DOS 7, syntax error
OS/2 Warp 3 2 aborted by user
3 fatal disk access error: cannot
read source / cannot format target
4 initialization error, out of
memory, invalid drive or syntax
|
DOSBOOK Novell DOS 7, 0 success
Caldera OpenDOS 7.01 31 syntax error
|
DPMI Novell DOS 7, 0 state changed
Caldera OpenDOS 7.01 1 called without parameters and
DPMI not active (else 0 returned)
|
EAUTIL OS/2 2.0+ 0 success
1 no files found to save
4 aborted because of error
|
EDIT Novell DOS 7, 0 success
Caldera OpenDOS 7.01 3 aborted by user
4 syntax error
|
FASTOPEN MS-DOS 5.0+ 0 success (always returned for
DR DOS 6.0, Novell DOS 7 and DR DOS 6.0 )
Novell DOS 7, 1 syntax error (not for DR DOS 6.0
Caldera OpenDOS 7.01 and Novell DOS 7: FASTOPEN is
only a dummy command there!)
|
FC Novell DOS 7, 0 success or help, no matter if
Caldera OpenDOS 7.01 files same or different!
1 file(s) not found or syntax error
3 aborted by user
|
FDISK Novell DOS 7, 0 success
Caldera OpenDOS 7.01 3 aborted by user
|
FIND MS-DOS 5.0+ 0 success, for MS DOS 6.2 also:
found string, for Novell DOS and
Caldera OpenDOS 7.01 also: no
files to be processed
1 MS-DOS: success, but no match
2 MS-DOS: syntax error
31 Novell DOS 7: aborted by user,
syntax error or no string given
|
FORMAT MS-DOS 4.0+, 0 success
Novell DOS 7, 3 aborted by user
Caldera OpenDOS 7.01, 4 fatal error, disk broken or wrong
PC-DOS 7, name
OS/2 2.0+ 5 harddisk format confirmation
not given (user selected "no")
6 OS/2 2.0+: FORMAT could not find
the module for that filesystem type
7 OS/2 2.0+: drive not supported by
module for that filesystem type
|
GRAFTABL MS-DOS 4.0+, 0 success: loaded with new codepage
OS/2 2.0+, (no codepage loaded previously)
Novell DOS 7, 1 replaced table by new one (loaded
Caldera OpenDOS 7.01 new codepage into existing TSR)
2 Novell, MS-DOS 4.0+: file error
OS/2 2.0+: no codepage was and
will be loaded
3 syntax error, nothing done
4 wrong DOS version
|
ISWINDOW OS/2 Warp 3 0 DOS-Session is in fullscreen mode
1 DOS-Session running in a window
|
JOIN MS-DOS 5.0+, 0 success (never for Novell DOS 7
Novell DOS 7, and OpenDOS!?)
Caldera OpenDOS 7.01 1 MS DOS: syntax error
Novell DOS 7, 1 other: cannot make JOIN directory
Caldera OpenDOS 7.01 3 other: aborted by user
32 other: displayed the JOIN list
43 other: error
255 other: successfully assigned...
|
KEYB MS-DOS 4.0+, 0 success
PC-DOS 7 1 syntax error, charset or key
code invalid
2 wrong or missing keyboard
definition file (keyboard.sys)
3 could not generate keyboard table
in RAM (MS DOS 5 / PC DOS 7?)
4 error accessing CON
5 required codepage not ready
6 table for codepage not found in
resident table in RAM (MS DOS 5 /
PC DOS 7?)
7 invalid DOS version, nothing done
(not for PC-DOS 7?)
|
LABEL MS-DOS 5.0+ 0 success
Novell DOS 7, 1 MS DOS: invalid or non-existing
Caldera OpenDOS 7.01 2 not MS DOS: aborted by user
4 not MS DOS: syntax error or
invalid or non-existing drive
|
MEMMAX Novell DOS 7, 0 success
Caldera OpenDOS 7.01 3 aborted by user
|
MODE MS-DOS 5.0+ 0 success
1 syntax error
|
MORE Novell DOS 7, 0 help screen displayed
Caldera OpenDOS 7.01 3 aborted by user during (possibly
redirected) input processing
255 success, or aborted by user during
(possibly redirected) output
processing / paginated display
|
MOVE MS-DOS 6.2+ 0 success
1 failure
|
NLSFUNC Novell DOS 7, 0 success
Caldera OpenDOS 7.01 3 aborted by user
|
OPENS CCI Multiuser DOS 7.x 0 no files open
3 there are files open on the system
|
RECOVER Novell DOS 7, 0 success
Caldera OpenDOS 7.01, 1 OS/2 Warp 3: no files to process
OS/2 2.0+ 2 OS/2 Warp 3: some files could not
be processed due to access error
sharing violation
3 aborted by user
4 OS/2 2.0+: aborted because of
error
5 OS/2 2.0+: reading or writing
failed in FAT area
6 OS/2 2.0+: the module for this
particular filesystem could not
be run
|
REPLACE MS-DOS 4.0+, 0 success
PC-DOS 7, 1 OS/2 2.0+: no files to replace
OS/2 2.0+ 2 (source) file not found
OS/2 2.0+: some directories or
files could not be processed,
file error
3 path not found (PC-DOS 7 also:
source file not found)
4 OS/2 2.0+: aborted because of
errors
5 access to source file denied
OS/2 Warp 3: use /R to override
8 out of memory (not OS/2 2.x?)
11 syntax error (not OS/2 2.x?)
15 drive invalid (not for MS DOS
5.0 and OS/2 2.x?)
|
RESTORE MS-DOS 4.0+, 0 success
DR DOS 6.0, 1 no files to restore
CCI Multiuser DOS 7.x 2 some files could not be restored
Novell DOS 7, due to access / sharing violations
Caldera OpenDOS 7.01, (not PC-DOS 7?)
PC-DOS 7, 3 aborted by user
OS/2 2.0+ 4 aborted after other error, source
has no backup data, syntax error
|
SCANDISK MS-DOS 6.2+ 0 success
1 syntax error
2 out of memory, internal error
3 aborted by user
4 filesystem okay but no full
surface scan for all drives done
(or aborted). Not if surface scan
was suppressed completely.
254 errors found but corrected
255 errors found but not all corrected
|
SETVER MS-DOS 4.0+, 0 success
PC-DOS 7, 1 syntax error (Novell / PC DOS 7:
(Novell DOS 7, invalid DOS version specified)
Caldera OpenDOS 7.01) 2 file name invalid
3 out of memory, cannot load
4 invalid version number format
5 version table entry not found
6 SETVER.EXE not found for patching
7 invalid drive
8 too many command line switches
9 command line switch missing
10 error reading SETVER.EXE
11 SETVER.EXE damaged or unuasable
12 SETVER.EXE not found (or, MS DOS
6.2 / PC DOS 7: SETVER.EXE does
not support version table?)
13 out of space in version table
14 error writing SETVER.EXE
|
SORT Novell DOS 7, 0 success
Caldera OpenDOS 7.01 1 file too big (more than 64k?)
MS-DOS, PC-DOS (not happening with Novell / Open
DOS, can handle bigger files!?)
2 Novell / Caldera: aborted by user
4 Novell / Caldera: syntax error
|
SUBST MS-DOS 5.0+, 0 success
Novell DOS 7, 1 syntax error (Novell: not enough
Caldera OpenDOS 7.01 arguments)
3+ Novell: length of the TRUENAME of
a changed SUBST drive (3..67)
Maybe this errorlevel is returned
inadvertedly, but it is useful.
|
SYS Novell DOS 7, 0 success
Caldera OpenDOS 7.01 3 aborted by user / cannot write
boot sector
4 syntax error
|
TOUCH Novell DOS 7, 0 ok / help
Caldera OpenDOS 7.01 31 no file name given, syntax error,
TOUCH failed for some files
|
TREE Novell DOS 7, 0 success
Caldera OpenDOS 7.01 1 syntax error, drive access error
3 aborted by user
4 read error (no disk in drive)
|
UNDELETE Novell DOS 7, 0 success (no function?)
Caldera OpenDOS 7.01 2 ???
31 general error (errorcode xx),
e.g. errorcode 3 for invalid
time format in /T: argument
|
UNFORMAT Novell DOS 7, 0 success
Caldera OpenDOS 7.01 1 invalid drive
3 aborted by user
4 cannot read drive (no floppy)
|
UNPACK OS/2 2.0+ 0 success
1 no files found for unpacking
2 some files or directories could
not be processed, file error
3 aborted by user
4 aborted because of error
|
XCOPY MS-DOS 4.0+, 0 success
Novell DOS 7, 1 no files to copy
Caldera OpenDOS 7.01, 2 aborted by user (not for PC DOS?)
PC-DOS 7, OS/2 2.0: some files or directories
OS/2 2.0+ could not be processed, file error
3 OS/2 2.0, PC-DOS 7: aborted by user
4 initialization error, out of memory,
invalid options, disk full, file or
path not found.
5 INT24 when reading/writing data
|